Booster Pumps and Systems - Page 3 | Raptor Supplies Singapore

Booster Pumps And Systems

Filter

Booster pumps and systems are ideal for boosting the pressure of the fluids flowing through them. These water booster pumps are used in food processing, mining, plumbing and aerospace. Raptor... Read More

FLINT & WALLING -

Booster Pump, 1/2 hp, 3 Phase, 208-230/460VAC, 132 PSI Shut Off

ModelItemPrice (inc. GST)
PB0512A053CP6BNG SGD 2019.66
FLINT & WALLING -

Booster Pump, 1/3 hp, 1 Phase, 115/230VAC, 27 PSI Shut Off, 1 1/4 Inch Intake and Disch

ModelItemPrice (inc. GST)
CJ103031ABCP6BNH SGD 1589.88
FLINT & WALLING -

Booster Pump, 2 hp, 1 Phase, 115/230VAC, 190 PSI Shut Off

ModelItemPrice (inc. GST)
PB1914S201CP6BNJ SGD 3362.48
FLINT & WALLING -

Booster Pump, 2 hp, 1 Phase, 115/230VAC, 190 PSI Shut Off, 3/4 Inch Intake and Disch

ModelItemPrice (inc. GST)
PB1914A201CP6BNK SGD 2999.12
FLINT & WALLING -

Booster Pump, 2 hp, 3 Phase, 208-230/460VAC, 190 PSI Shut Off

ModelItemPrice (inc. GST)
PB1914S203CP6BNL SGD 3608.58
FLINT & WALLING -

Booster Pump, 2 hp, 3 Phase, 208-230/460VAC, 190 PSI Shut Off, 3/4 Inch Intake and Disch

ModelItemPrice (inc. GST)
PB1914A203CP6BNM SGD 3187.71
FLINT & WALLING -

Booster Pump, 2 hp, 3 Phase, 208-230/460VAC, 98 PSI Shut Off, 1 1/4 Inch Intake and Disch

ModelItemPrice (inc. GST)
CJ101C203ABCP6BNN SGD 3934.68
FLINT & WALLING -

Booster Pump, 3 hp, 1 Phase, 230VAC, 60 PSI Shut Off, 2 Inch Intake and Disch

ModelItemPrice (inc. GST)
PB8505A301CP6BNP SGD 3284.04
FLINT & WALLING -

Booster Pump, 3 hp, 1 Phase, 230VAC, 83 PSI Shut Off, 2 Inch Intake and Disch

ModelItemPrice (inc. GST)
PB5506A301CP6BNQ SGD 3247.87
GOULDS WATER TECHNOLOGY -

Constant Pressure Booster Pump, 1 Hp, Single Phase, 115VAC, 35 PSI

ModelItemPrice (inc. GST)
1151AB21HM04CP6PLX SGD 4667.65

Booster Pumps And Systems

Booster pumps are designed to increase the pressure of existing fluid flow systems & achieve higher flow rates in plumbing, aerospace, mining and food processing. Raptor Supplies offers a vast range of booster pumps from Dayton, Flint & Walling, Goulds Water Technology, Little Giant and Shurflo. Booster pumps increase low water pressure in water systems and transport water from a pond, lake or storage tank for use in commercial buildings. Little Giant booster pumps feature Franklin Electric pump and motor ideal for creating optimum pressure in plumbing systems. These booster pumps come equipped with a protective cap for outdoor use and can be installed vertically or horizontally. They have many protective features such as over / under voltage, over temperature and dry run protection for safe and reliable performance. Booster pumps and systems from Shurflo feature an electric water boost pump which increases city water pressure and flow to the dispenser valve to maintain the brix. These intermittent water boosters feature a pressure reducing valve for added safety against fluctuating water pressure & flow, and eliminates the need for water regulators. These pumps come with an accumulator tank to maintain consistent water pressure to one or more dispensing valves. They feature stainless steel housing which prevents corrosion & dirt, and can withstand pressures upto to 117 psi.

Working Mechanism

  • When a fluid is forced through a pipe or other type of conduit, the pressure of the fluid increases.
  • By increasing the pressure of the fluid, the booster pump is able to increase the flow rate of the fluid. This is accomplished through the use of a motor, which drives a impeller or other type of rotary device that generates the necessary pressure.
  • The fluid is drawn into the pump through an inlet port, and is then discharged through an outlet port at a higher pressure.

Frequently Asked Questions

How do I choose the right booster pump for my application?

There are many factors to consider when choosing a booster pump, including the type of fluid being pumped, the pressure and flow rate requirements, and the environment in which the pump will be used.

How to check if the pressure tank is working appropriately in the booster pump system?

  • The pressure in an empty well pressure tank should be below 2 PSI of the tank's cut-on point.
  • When the pressure falls below the cut-on point, the pressure switch will turn on the good pump.
  • The pressure at which the pressure switch turns off the pump to stop it from rising above a specific point is known as the cut-off point.

We are here to help!

Looking for a part not listed here?