What is the difference between an eyebolt and a ringbolt?

A standard eyebolt features a single forged ring on the top of the shank, whereas a ringbolt is equipped with an extra ring around the first ring. Eyebolts can only accommodate forces that are vertically above or below, while ringbolts can handle angled forces as well.

How to install eyebolts?

Determine the thickness of the material in which the bolt will be installed. Choose a bolt such that the threaded portion of the eyebolt protrudes out of the surface. If the eyebolt has unthreaded portion inside the material, use washers to raise the height of the bolt such that only the threaded portion is inside the material. Install the eyebolt inside the pre-tapped hole in the material. Use a screwdriver as a lever to screw in the bolt or hand-tighten it. Attach a nut if possible.

What are some safety precautions while using or installing eyebolts?

Use eyebolts with a higher working load limit than required. Check for signs of wear or damage on the bolts. The threads on the eyebolt's shank & tapped hole should be clean. Do not grind or cut the eyebolt as that would damage the inner strength of the bolt. Loads should be applied on the axis of the eye.

Eyebolts

Filter

TE-CO -

Eye Bolts

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Thread Length	Thread Size	Price (inc. GST)
A	42935	1/4"	5/8"	3-5/16	5/16"	2 11/16"	1.5"	5/16-18	SGD 19.49
B	42955	3/4"	1.5"	5.25	3/4"	3.75"	2"	3/4-10	SGD 53.88
C	42941	3/8"	3/4"	3.375	3/8"	2.625"	1.5"	3/8-16	SGD 20.12
D	42942	3/8"	3/4"	4.125	3/8"	3.375"	2"	3/8-16	SGD 22.08
E	42943	3/8"	3/4"	5.375	3/8"	4.625"	2.5"	3/8-16	SGD 26.28
F	42945	3/8"	1"	4.25	1/2"	3.25"	1.5"	1/2-13	SGD 30.94
G	42946	3/8"	1"	5.5	1/2"	4.5"	2"	1/2-13	SGD 36.48
H	42950	3/8"	1.25"	5.125	5/8"	3.875"	2"	5/8-11	SGD 49.39
I	42951	3/8"	1.25"	6.625	5/8"	5.375"	2.5"	5/8-11	SGD 48.64
J	42930	3/16"	1/2"	2.25	1/4"	1.75"	3/4"	1/4-20	SGD 13.43
K	42931	3/16"	1/2"	3.25	1/4"	2.75"	1.25"	1/4-20	SGD 16.77
L	42940	5/16"	3/4"	3.375	3/8"	2.625"	1.5"	3/8-16	SGD 18.87

KEN FORGING -

Eye Bolts

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Finish	Material	Min. Tensile Strength	Overall Length	Shank Dia.	Price (inc. GST)
A	K2008-SS	1 1/2"	2 13/16"	Lift without Shoulder	Plain	Stainless Steel	75,000 PSI	5.06"	3/4"	SGD 96.88
B	K2028-SS	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	75,000 PSI	5.5"	3/4"	SGD 99.66
C	K2028-HDG	1 1/2"	2 13/16"	Lift with Shoulder	Galvanized	Steel	65,000 PSI	5.5"	3/4"	SGD 44.16
C	K2028-A-HDG	1 1/2"	2 13/16"	Lift with Shoulder	Galvanized	Steel	65,000 PSI	4.89"	3/4"	SGD 46.66
D	K2028-6	1 1/2"	1 1/2"	Lift with Shoulder	Plain	Steel	65,000 PSI	9.39"	3/4"	SGD 49.07
E	K2028-4-SS	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	75,000 PSI	7.39"	3/4"	SGD 153.40
F	K2028-4	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Steel	65,000 PSI	3.4"	3/4"	SGD 47.16
G	K2028-3-SS	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	75,000 PSI	6.39"	3/4"	SGD 138.53
H	K2028-2-1/2-SS	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	75,000 PSI	5.89"	3/4"	SGD 129.91
I	K2028-LT	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Steel	95,000 PSI	5.5"	3/4"	SGD 124.05
J	N2028-316SS-6	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	-	9.39"	3/4"	SGD 154.61
K	N2028-316SS-12	1 1/2"	2 13/16"	Lift with Shoulder	Plain	Stainless Steel	-	15.39"	3/4"	SGD 174.73
L	N2008-316SS-6	1 1/2"	2 13/16"	Lift without Shoulder	Plain	Stainless Steel	-	8.81"	3/4"	SGD 152.42
M	N2008-316SS-12	1 1/2"	2 13/16"	Lift without Shoulder	Plain	Stainless Steel	-	14.81"	3/4"	SGD 187.20
N	K2008-6	1 1/2"	2 13/16"	Lift without Shoulder	Plain	Steel	65,000 PSI	8.95"	3/4"	SGD 46.98
O	K2008-HDG	1 1/2"	2 13/16"	Lift without Shoulder	Galvanized	Steel	65,000 PSI	5.06"	3/4"	SGD 41.74
P	K2008-LT	1 1/2"	2 13/16"	Lift without Shoulder	Plain	Steel	95,000 PSI	5.06"	3/4"	SGD 120.30
Q	N2029-316SS-6	1 3/4"	3 1/2"	Lift with Shoulder	Plain	Stainless Steel	-	10.06"	7/8"	SGD 173.68
R	N2009-316SS-6	1 3/4"	3 1/2"	Lift without Shoulder	Plain	Stainless Steel	-	9.53"	7/8"	SGD 156.57
S	N2029-316SS-12	1 3/4"	3 1/2"	Lift with Shoulder	Plain	Stainless Steel	-	16.06"	7/8"	SGD 216.64
T	N2009-316SS-12	1 3/4"	3 1/2"	Lift without Shoulder	Plain	Stainless Steel	-	15.53"	7/8"	SGD 182.30
U	N2027-316SS-12	1 3/8"	2 1/2"	Lift with Shoulder	Plain	Stainless Steel	-	15.0"	5/8"	SGD 123.15
C	K2027-HDG	1 3/8"	2 1/2"	Lift with Shoulder	Galvanized	Steel	65,000 PSI	4.89"	5/8"	SGD 35.27
V	K2027-2-1/2-SS	1 3/8"	2 1/2"	Lift with Shoulder	Plain	Stainless Steel	75,000 PSI	5.56"	5/8"	SGD 93.33
W	K2027-SS	1 3/8"	2 1/2"	Lift with Shoulder	Plain	Stainless Steel	75,000 PSI	4.89"	5/8"	SGD 94.97

FABORY -

Eye Bolts

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Finish	Item	Material	Overall Length	Shank Dia.	Price (inc. GST)
A	L16180.080.0050	8 mm	18.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1797.60
B	M16180.080.0090	8 mm	18 mm	without Shoulder	Unfinished	Eye Bolt	Steel	90 mm	M8	SGD 150.00
C	L16180.080.0120	8 mm	18.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1603.17
D	L16180.080.0080	8 mm	18.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1715.64
E	L16180.080.0140	8 mm	18.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1649.49
F	L16180.100.0060	10 mm	20.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1456.44
G	L16180.100.0070	10 mm	20.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1391.05
H	L16180.120.0150	12 mm	25.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 999.92
I	L16180.160.0080	16 mm	32.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1156.90
J	L16180.160.0160	16 mm	32.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1071.19
K	L16180.160.0200	16 mm	32.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1043.49
L	L16180.160.0120	16 mm	32.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 856.32
M	L16180.160.0060	16 mm	32.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1229.69
J	L16180.200.0160	18 mm	40.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 968.15
N	L51940.080.0001	20 mm	36.0 mm	with Shoulder	Plain	Eye Bolt	Stainless Steel	49.0 mm	8 mm	SGD 1443.28
O	L16180.240.0150	22 mm	45.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1244.22
P	L16180.240.0140	22 mm	45.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1148.16
Q	L16180.240.0080	22 mm	45.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1940.40
J	L16180.300.0180	28 mm	55.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1124.05
R	L16180.300.0200	28 mm	55.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1283.86
S	L16180.300.0160	28 mm	55.0 mm	-	Plain	Eye Bolt	Low Carbon Steel 4.6	-	-	SGD 1466.50
T	L16010.120.0001	30 mm	54.0 mm	with Shoulder	Zinc	Eye Bolt	Steel	74.5 mm	12 mm	SGD 434.14
T	L16010.200.0001	40 mm	72.0 mm	with Shoulder	Zinc	Eye Bolt	Steel	102.0 mm	20 mm	SGD 471.46
U	L16000.240.0001	50 mm	90.0 mm	Lift with Shoulder	Plain	Eye Bolt	Steel	126.0 mm	24 mm	SGD 519.94
U	M16000.240.0001	50.0mm	90.0mm	Lift with Shoulder	Plain	Lifting Eye Bolt	Steel	126mm	24.0mm	SGD 196.69

CROSBY -

Eye Bolts

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Finish	Overall Length	Shank Length	Thread Size	Working Load Limit	Price (inc. GST)
A	1045176	1 1/4"	2 1/4"	Galvanized	6.44"	4"	2-11	5,200 Lbs.	SGD 92.32
B	9900257	2 1/4"	4 3/16"	Black Oxide	7.2"	2 3/4"	1 1/8-7	-	SGD 215.80
B	9900280	3 1/2"	6 1/4"	Black Oxide	10.48"	3 3/4"	1 3/4-5"	-	SGD 903.81
B	9900298	4 1/2"	8 3/4"	Black Oxide	14.88"	5"	2 1/2-4	-	SGD 1800.68
B	9900289	4"	7 5/8"	Black Oxide	12.33"	4"	2-4 1/2"	-	SGD 1169.93
C	1045050	5/8"	1 1/18"	Galvanized	3.5"	2 1/4"	1 1/2-18	1,200 Lbs.	SGD 33.62

CHICAGO HARDWARE -

Eye Bolts

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Finish	Material	Overall Length	Shank Dia.	Shank Length	Price (inc. GST)
A	07460 5	1"	1.875"	Turned Wire	Plain	Stainless Steel	4"	1/2"	2"	-	RFQ
B	12045 6	1"	1.875"	Turned Wire	Black Oxide	Steel	8"	1/2"	6"	-	RFQ
C	07210 6	1"	1.875"	Turned Wire	Zinc	Steel	4"	1/2"	2"	-	RFQ
C	07215 1	1"	1.875"	Turned Wire	Zinc	Steel	6"	1/2"	4"	SGD 4.00
D	07220 5	1"	1.875"	Turned Wire	Zinc	Steel	8"	1/2"	6"	SGD 4.60
E	14215 1	1"	1-21/32"	Lift without Shoulder	Plain	Stainless Steel	2 29/32"	-	1.25"	SGD 55.39
F	11591 9	1"	1.875"	Turned Wire	Black Oxide	Steel	4"	1/2"	2"	-	RFQ
F	11601 5	1"	1.875"	Turned Wire	Black Oxide	Steel	6"	1/2"	4"	-	RFQ
G	08262 4	1"	2"	Forged without Shoulder	Plain	Stainless Steel	5.25"	-	3.25"	-	RFQ
A	07465 0	1"	1.875"	Turned Wire	Plain	Stainless Steel	6"	1/2"	4"	SGD 20.37
A	07470 4	1"	1.875"	Turned Wire	Plain	Stainless Steel	8"	1/2"	6"	-	RFQ
H	26056 5	1"	1-21/32"	Lift with Shoulder	Zinc	Steel	3.25"	3/8"	1.25"	SGD 583.61
H	12845 2	1"	1-21/32"	Lift with Shoulder	Plain	Steel	3.25"	3/8"	1.25"	-	RFQ
I	26059 6	1-3/32"	1-27/32"	Lift with Shoulder	Zinc	Steel	3.625"	7/16"	1.375"	-	RFQ
H	12905 3	1-9/32"	2-9/32"	Lift with Shoulder	Plain	Steel	4.5"	9/16"	1.625"	-	RFQ
J	12968 8	1-11/16"	3.25"	Lift with Shoulder	Plain	Steel	6"	7/8"	2.25"	SGD 433.76
H	12988 6	1-13/16"	3-9/16"	Lift with Shoulder	Plain	Steel	7"	1"	2.5"	SGD 570.41
H	SP20371	1.5"	2-13/16"	Lift with Shoulder	Zinc	Steel	5 9/16"	3/4"	2.5"	SGD 1050.56
K	14230 4	1.5"	2-13/16"	Lift without Shoulder	Plain	Stainless Steel	4 13/16"	-	2"	SGD 211.72
H	12948 0	1.5"	2-13/16"	Lift with Shoulder	Plain	Steel	5.25"	3/4"	2"	-	RFQ
G	11851 4	1.25"	2-5/16"	Forged without Shoulder	Plain	Stainless Steel	6 13/16"	-	4.5"	-	RFQ
L	08682 0	1.25"	2-5/16"	Forged with Shoulder	Plain	Stainless Steel	7.25"	-	4.5"	-	RFQ
M	11524 7	1.187"	2-1/16"	Blank with Shoulder	Plain	Stainless Steel	3.156"	1/2"	3/4"	SGD 109.56
N	SP23134	1.187"	2-1/16"	Blank without Shoulder	Plain	Stainless Steel	2 13/16"	1/2"	3/4"	SGD 109.56
O	12885 8	1.187"	2-1/16"	Lift with Shoulder	Plain	Steel	4"	1/2"	1.5"	-	RFQ

BUYERS PRODUCTS -

Eye Bolts

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Length	Thread Size	Working Load Limit	Price (inc. GST)
A	B56728	1 1/2"	2 13/16"	0.75"	2"	3/4-10	6,000 Lbs.	SGD 29.00
A	B56727	1 3/8"	2 1/2"	0.63"	1 3/4"	5/8-11	4,000 Lbs.	-	RFQ
A	B56725	1 3/16"	2 1/16"	0.5"	1 1/2"	1/2-13	2,400 Lbs.	SGD 15.17
A	B56729	1 11/16"	3 1/4"	0.88"	2 1/4"	7/8-9	7,000 Lbs.	SGD 35.79
A	B56730	1 13/16"	3 9/16"	1.0"	2 1/4"	1-8	8,000 Lbs.	SGD 51.90
A	B56723	1"	1 21/32"	0.38"	1 1/4"	3/8-16	1,400 Lbs.	SGD 11.94
B	B56734BLK	2 9/16"	5 1/2"	1.5"	3 1/2"	Unthreaded	18,000 Lbs.	SGD 97.34
A	B56721	3/4"	13/16"	N/A	1"	1/4-20	400 Lbs.	SGD 10.95
A	B56722	7/8"	1 1/2"	0.31"	1 1/8"	5/16-18	1,000 Lbs.	SGD 11.47

VULCAN HART -

Eye Bolts

Style	Model	Price (inc. GST)
A	00-402570-00002	-	RFQ
A	00-402570-00003	-	RFQ
B	00-719331	SGD 13.21

PROTO -

Eye Bolt Lifts

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Item	Overall Length	Shank Dia.	Shank Length	Thread Length	Thread Size	Price (inc. GST)
A	J94022	1"	1-11/16"	Eyebolt	3.5"	3/8"	1.25"	1.25"	3/8-16	SGD 17.18
B	J94023	1-1/16"	1-13/16"	Eyebolt	3.75"	7/16"	1.375"	1.375"	7/16-14	SGD 16.50
B	J94027	1.5"	2-13/16"	Eye Bolt	5.5"	3/4"	2"	2"	3/4-10	SGD 41.46
B	J94029	1.75"	3-9/16"	Eyebolt	6.5"	1"	2.5"	2.5"	1-8	-	RFQ
B	J94025	1.375"	2-9/16"	Eyebolt	4.75"	9/16"	1.75"	1.75"	9/16-12	-	RFQ
B	J94026	1.375"	2-9/16"	Eyebolt	4.75"	5/8"	1.75"	1.75"	5/8-11	SGD 34.92
C	J94028	1.625"	3.187"	Eyebolt	5.75"	7/8"	2.25"	2.25"	7/8-9	-	RFQ
B	J94030	2"	4-1/16"	Eyebolt	7.5"	1.125"	2.75"	2.75"	8	SGD 86.92
B	J94032	2.5"	5.187"	Eyebolt	9.5"	1.5"	3.5"	3.5"	7	-	RFQ
B	J94033	2.75"	6"	Eyebolt	10.75"	1.75"	3.75"	3.75"	6	SGD 374.63
B	J94031	2.187"	4.437"	Eyebolt	8.25"	1.25"	3"	3"	8	-	RFQ
B	J94034	3.25"	6.875"	Eyebolt	11.75"	2"	4"	4"	2.5	SGD 278.47
B	J94021	7/8"	1.437"	Eyebolt	3"	5/16"	1.125"	1.125"	5/16-18	SGD 16.31

CROSBY -

Pad Eyes

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Finish	Overall Length	Price (inc. GST)
A	1090768	0.63"	1 9/64"	Forged with Shoulder	Powder Coat	1.31"	SGD 18.66
B	1090786	0.75"	1 1/2"	Forged with Shoulder	Powder Coat	1.63"	SGD 18.85
C	1090820	1 1/4"	2 5/8"	Blank without Shoulder	Black Oxide	2.75"	SGD 54.24
D	1090802	1"	2 9/64"	Forged with Shoulder	Powder Coat	2.34"	SGD 33.62
C	1090722	1/4"	5/8"	Blank without Shoulder	Black Oxide	0.75"	SGD 10.68
C	1090740	5/16"	7/8"	Blank without Shoulder	Black Oxide	1.03"	SGD 13.86

FABORY -

Lifting Eye Bolts

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Item	Shank Dia.	Thread Size	Working Load Limit	Price (inc. GST)
A	L16100.060.0001	20 mm	36 mm	Lifting Eye Bolt	-	M6 x 1	900 (N)	SGD 3627.96	RFQ
A	L16100.080.0001	20 mm	36 mm	Lifting Eye Bolt	-	M8 x 1.25	1400 (N)	SGD 1362.12	RFQ
B	L16000.060.0001	20 mm	36.0 mm	Eye Bolt	20 mm	M6 x 1	900 (N)	SGD 642.28
B	L16000.080.0001	20 mm	36.0 mm	Eye Bolt	20 mm	M8 x 1.25	1400 (N)	SGD 648.57
A	L16100.100.0001	25 mm	45 mm	Lifting Eye Bolt	-	M10 x 1.5	2300 (N)	SGD 1313.66	RFQ
B	L16000.100.0001	25 mm	45.0 mm	Eye Bolt	25 mm	M10 x 1.5	2300 (N)	SGD 643.77
A	L16100.120.0001	30 mm	54 mm	Lifting Eye Bolt	-	M12 x 1.75	3400 (N)	SGD 1259.46	RFQ
B	L16000.120.0001	30 mm	54.0 mm	Eye Bolt	30 mm	M12 x 1.75	3400 (N)	SGD 727.68
C	L16000.140.0001	30 mm	54.0 mm	Eye Bolt	30 mm	M14 x 2	5000 (N)	SGD 1382.24
A	L16100.160.0001	35 mm	63 mm	Lifting Eye Bolt	-	M16 x 2	7000 (N)	SGD 1298.35	RFQ
D	L16000.160.0001	35 mm	63.0 mm	Eye Bolt	35 mm	M16 x 2	7000 (N)	SGD 507.66
A	L16100.200.0001	40 mm	72 mm	Lifting Eye Bolt	-	M20 x 2.5	12,000 (N)	SGD 1458.34	RFQ
A	L16100.220.0001	40 mm	72 mm	Lifting Eye Bolt	-	M22x2.5	15,000 (N)	SGD 496.63
D	L16000.220.0001	40 mm	72.0 mm	Eye Bolt	40 mm	M22x2.5	15,000 (N)	SGD 537.82
D	L16000.200.0001	40 mm	72.0 mm	Eye Bolt	40 mm	M20 x 2.5	12,000 (N)	SGD 543.74
D	L16000.270.0001	50 mm	90.0 mm	Eye Bolt	50 mm	M27x3	25,000 (N)	SGD 901.48
A	L16100.240.0001	50 mm	90 mm	Lifting Eye Bolt	-	M24 x 3	18,000 (N)	SGD 454.76
D	L16000.300.0001	60 mm	108.0 mm	Eye Bolt	65 mm	M30x3.5	32,000 (N)	SGD 523.52
E	L16000.330.0001	60 mm	108.0 mm	Eye Bolt	65 mm	M33x3.5	42,000 (N)	SGD 1023.41
A	L16100.300.0001	60 mm	108 mm	Lifting Eye Bolt	-	M30x3.5	32,000 (N)	SGD 1013.05
F	L16000.360.0001	70 mm	126.0 mm	Eye Bolt	75 mm	M36x4	46,000 (N)	SGD 492.97
F	L16000.390.0001	70 mm	126.0 mm	Eye Bolt	75 mm	M39x4	60,000 (N)	SGD 686.37
A	L16100.360.0001	70 mm	126 mm	Lifting Eye Bolt	-	M36x4	46,000 (N)	SGD 747.36

SUPER-STRUT -

Eye Bolt

Style	Model	Finish	Length	Size
A	E157-3/8X8B	Black	8"	3/8"	RFQ
A	E157-5/8X12B	Black	12"	5/8"	RFQ
A	E157-1/2X36B	Black	36"	1/2"	RFQ
A	E157-1/2X8EG	Electro-Galvanized	8"	1/2"	RFQ

GRAINGER -

Low Carbon Steel 4.6 Eye Bolt, Plain Finish

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Thread Size	Price (inc. GST)
A	M16180.060.0030	6.0mm	14.0mm	M6	SGD 94.90
B	M16180.060.0050	6.0mm	14.0mm	M6	SGD 58.09
C	M16180.060.0070	6.0mm	14.0mm	M6	SGD 171.67
D	M16180.060.0080	6.0mm	14.0mm	M6	SGD 174.20
E	M16180.060.0040	6.0mm	14.0mm	M6	SGD 132.13
F	M16180.080.0050	8.0mm	18.0mm	M8	SGD 100.28
G	M16180.080.0060	8.0mm	18.0mm	M8	SGD 155.47
H	M16180.080.0070	8.0mm	18.0mm	M8	SGD 154.81
I	M16180.080.0080	8.0mm	18.0mm	M8	SGD 161.75
J	M16180.080.0100	8.0mm	18.0mm	M8	SGD 175.50
K	M16180.080.0120	8.0mm	18.0mm	M8	SGD 188.83
L	M16180.080.0140	8.0mm	18.0mm	M8	SGD 206.84
M	M16180.100.0090	10.0mm	20.0mm	M10	SGD 190.35
N	M16180.100.0140	10.0mm	20.0mm	M10	SGD 255.11
O	M16180.100.0110	10.0mm	20.0mm	M10	SGD 217.24
P	M16180.100.0100	10.0mm	20.0mm	M10	SGD 172.65
Q	M16180.100.0080	10.0mm	20.0mm	M10	SGD 181.68
R	M16180.100.0070	10.0mm	20.0mm	M10	SGD 168.11
S	M16180.100.0040	10.0mm	20.0mm	M10	SGD 162.55
T	M16180.100.0060	10.0mm	20.0mm	M10	SGD 153.25
U	M16180.100.0050	10.0mm	20.0mm	M10	SGD 171.08
V	M16180.120.0140	12.0mm	25.0mm	M12	SGD 131.32
W	M16180.120.0130	12.0mm	25.0mm	M12	SGD 129.98
X	M16180.120.0120	12.0mm	25.0mm	M12	SGD 125.73
Y	M16180.120.0110	12.0mm	25.0mm	M12	SGD 129.86

GRAINGER -

Low Carbon Steel C15E Lifting Eye Bolt, Plain Finish

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Shank Dia.	Thread Size	Working Load Limit	Price (inc. GST)
A	M16000.060.0001	20.0mm	36.0mm	20.0mm	M6	900 (N)	SGD 87.73
A	M16000.080.0001	20.0mm	36.0mm	20.0mm	M8	1400 (N)	SGD 120.90
B	M16100.080.0001	20.0mm	36.0mm	20.0mm	M8	1400 (N)	SGD 115.84
B	M16100.060.0001	20.0mm	36.0mm	20.0mm	M6	900 (N)	SGD 177.74
B	M16100.100.0001	25.0mm	45.0mm	25.0mm	M10	2300 (N)	SGD 192.98
A	M16000.100.0001	25mm	45mm	25.0mm	M10	2300 (N)	SGD 199.20
C	M16100.140.0001	30.0mm	54.0mm	30.0mm	M14	5000 (N)	SGD 132.44
B	M16100.120.0001	30.0mm	54.0mm	30.0mm	M12	3400 (N)	SGD 299.09
D	M16000.140.0001	30mm	54mm	30.0mm	M14	5000 (N)	SGD 291.35
A	M16000.120.0001	30mm	54mm	30.0mm	M12	3400 (N)	SGD 331.37
B	M16100.160.0001	35.0mm	63.0mm	35mm	M16	7000 (N)	SGD 181.42
E	M16000.160.0001	35mm	63mm	35mm	M16	7000 (N)	SGD 147.18
E	M16000.220.0001	40.0mm	72.0mm	40.0mm	M22	15,000 (N)	SGD 122.40
C	M16100.220.0001	40.0mm	72.0mm	40.0mm	M22	15,000 (N)	SGD 132.70
B	M16100.200.0001	40.0mm	72.0mm	40.0mm	M20	12,000 (N)	SGD 310.32
E	M16000.200.0001	40mm	72mm	40.0mm	M20	12,000 (N)	SGD 214.22
E	M16000.270.0001	50.0mm	90.0mm	50.0mm	M27 x 3	25,000 (N)	SGD 485.20
C	M16100.240.0001	50.0mm	90.0mm	50.0mm	M24	18,000 (N)	SGD 244.57
C	M16100.270.0001	60.0mm	108.0mm	65mm	M27	25,000 (N)	SGD 486.82
C	M16100.300.0001	60.0mm	108.0mm	65mm	M30	32,000 (N)	SGD 113.30
F	M16000.330.0001	60.0mm	108.0mm	65mm	M33	42,000 (N)	SGD 246.84
E	M16000.300.0001	60.0mm	108.0mm	65mm	M30	32,000 (N)	SGD 94.28
C	M16100.360.0001	70.0mm	126.0mm	75mm	M36	46,000 (N)	SGD 181.47
G	M16000.360.0001	70.0mm	126.0mm	75mm	M36	46,000 (N)	SGD 138.61
G	M16000.390.0001	70.0mm	126.0mm	75mm	M39	60,000 (N)	SGD 249.59

APPROVED VENDOR -

316 Stainless Steel Eyebolt, High Polish Finish

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Thread Length	Thread Size	Price (inc. GST)
A	5LAE1	1/2"	1-1/16"	5 1/3"	5/16"	4"	2"	5/16-18	SGD 22.55
A	5LAE0	1/2"	1-1/16"	4.375"	5/16"	3"	2"	5/16-18	SGD 21.03
A	5LAE2	1/2"	1-1/16"	6.375"	5/16"	5"	2"	5/16-18	SGD 25.54
A	5LAE3	1/2"	1-1/16"	7.375"	5/16"	6"	2"	5/16-18	SGD 23.89
A	5LAD3	13/32"	23/32"	3"	3/16"	2"	1.5"	10-24	SGD 14.89
A	5LAD4	13/32"	23/32"	4"	3/16"	3"	2"	10-24	SGD 14.50
A	5LAD5	15/32"	29/32"	3.187"	1/4"	2"	1.5"	1/4-20	SGD 16.08
A	5LAD6	15/32"	29/32"	4.25"	1/4"	3"	2"	1/4-20	SGD 18.57
A	5LAD7	15/32"	29/32"	5.187"	1/4"	4"	2"	1/4-20	SGD 15.89
A	5LAD8	15/32"	29/32"	6 5/16"	1/4"	5"	2"	1/4-20	SGD 18.97
A	5LAD9	15/32"	29/32"	7"	1/4"	6"	2"	1/4-20	SGD 18.44
A	5LAE4	21/32"	1-11/32"	4.5"	3/8"	3"	2"	3/8-16	SGD 31.97
A	5LAE5	21/32"	1-11/32"	5.5"	3/8"	4"	2"	3/8-16	SGD 33.79
A	5LAE6	21/32"	1-11/32"	6.625"	3/8"	5"	2"	3/8-16	SGD 34.76
A	5LAE7	21/32"	1-11/32"	7.625"	3/8"	6"	2"	3/8-16	SGD 29.20

APPROVED VENDOR -

A2 Stainless Steel Eyebolt, Plain Finish

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Shoulder Dia.	Shoulder Length	Thread Length	Price (inc. GST)
A	M51940.080.0001	20mm	36mm	49mm	8mm	13mm	20mm	6mm	13mm	SGD 10.66
B	M51940.120.0001	30mm	54mm	74.5mm	12mm	20.5mm	30mm	10mm	20.5mm	SGD 55.53

APPROVED VENDOR -

Drop Forged Steel Eyebolt, Plain Finish

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Shoulder Dia.	Shoulder Length	Thread Length	Price (inc. GST)
A	M16000.420.0001	80mm	147mm	210mm	42mm	63mm	85mm	67mm	63mm	SGD 426.44
B	M16000.480.0001	90mm	168mm	236mm	48mm	68mm	100mm	78mm	68mm	SGD 422.84
B	M16000.640.0001	110mm	208mm	298mm	64mm	90mm	120mm	98mm	90mm	SGD 880.22

APPROVED VENDOR -

Steel Eyebolt, Zinc Plated Finish

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Thread Length	Thread Size	Price (inc. GST)
A	U17022.025.0275	1/2"	15/16"	3 11/16"	1/4"	2.75"	2"	1/4"	SGD 8.01
B	U17022.025.0400	1/2"	15/16"	4.875"	1/4"	4"	2"	1/4"	SGD 10.37
B	U17022.037.0600	3/4"	1-13/32"	7 5/16"	3/8"	6"	2.5"	3/8"	SGD 33.07
A	U17022.037.0300	3/4"	1-13/32"	4.375"	3/8"	3"	2.5"	3/8"	SGD 25.32
A	U17022.031.0275	5/8"	1-11/64"	3.875"	5/16"	2.75"	2"	5/16"	SGD 14.12

APPROVED VENDOR -

Drop Forged Carbon Steel Eyebolt, Hot Dipped Galvanized Finish

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Thread Length	Thread Size	Working Load Limit	Price (inc. GST)
A	U16181.050.0600	1"	2"	8"	1/2"	6"	3"	1/2-13	2200 Lbs.	SGD 20.79
A	U16181.050.0450	1"	2"	6.5"	1/2"	4.5"	3"	1/2-13	2200 Lbs.	SGD 19.83
A	U16181.050.1200	1"	2"	14"	1/2"	12"	4"	1/2-13	2200 Lbs.	SGD 37.13
A	U16181.050.0800	1"	2"	10"	1/2"	8"	4"	1/2-13	2200 Lbs.	SGD 30.42
A	U16181.050.1000	1"	2"	12"	1/2"	10"	4"	1/2-13	2200 Lbs.	SGD 29.68
A	U16181.050.0200	1"	2"	4"	1/2"	2"	1.625"	1/2-13	2200 Lbs.	SGD 18.26
A	U16181.050.0325	1"	2"	4.5"	1/2"	3.25"	2"	1/2-13	2200 Lbs.	SGD 14.36
A	U16181.025.0600	1/2"	1"	7"	1/4"	6"	3"	1/4-20	500 Lbs.	SGD 15.44
A	U16181.025.0400	1/2"	1"	5"	1/4"	4"	2"	1/4-20	500 Lbs.	SGD 13.28
A	U16181.025.0300	1/2"	1"	4"	1/4"	3"	1.5"	1/4-20	500 Lbs.	SGD 12.67
A	U16181.025.0200	1/2"	1"	3"	1/4"	2"	1.5"	1/4-20	500 Lbs.	SGD 12.55
A	U16181.037.0400	3/4"	1.5"	5.5"	3/8"	4"	2"	3/8-16	1200 Lbs.	SGD 18.88
A	U16181.037.0250	3/4"	1.5"	4"	3/8"	2.5"	1.5"	3/8-16	1200 Lbs.	SGD 16.15
A	U16181.037.0450	3/4"	1.5"	6"	3/8"	4.5"	3"	3/8-16	1200 Lbs.	SGD 17.49
B	U16181.037.0600	3/4"	1.5"	7.5"	3/8"	6"	3"	3/8-16	1200 Lbs.	-	RFQ
A	U16181.037.0300	3/4"	1.5"	4.5"	3/8"	3"	1.5"	3/8-16	1200 Lbs.	SGD 15.65
A	U16181.037.0800	3/4"	1.5"	9.5"	3/8"	8"	4"	3/8-16	1200 Lbs.	SGD 23.63

APPROVED VENDOR -

Drop Forged Steel Eyebolt, Zinc Plated Finish

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Overall Length	Shank Dia.	Shank Length	Shoulder Dia.	Shoulder Length	Thread Length	Price (inc. GST)
A	M16010.080.0001	20mm	36mm	49mm	8mm	13mm	20mm	6mm	13mm	SGD 13.14
A	M16010.100.0001	25mm	45mm	62mm	10mm	17mm	25mm	8mm	17mm	SGD 22.92
A	M16010.120.0001	30mm	54mm	74.5mm	12mm	20.5mm	30mm	10mm	20.5mm	SGD 20.67
A	M16010.160.0001	35mm	63mm	90mm	16mm	27mm	35mm	12mm	27mm	SGD 41.46
B	M16010.200.0001	40mm	72mm	102mm	20mm	30mm	40mm	14mm	30mm	SGD 25.92
B	M16010.240.0001	50mm	90mm	126mm	24mm	36mm	50mm	18mm	36mm	SGD 58.46
B	M16010.300.0001	60mm	108mm	153mm	30mm	45mm	65mm	22mm	45mm	SGD 89.07
B	M16010.360.0001	70mm	126mm	180mm	36mm	54mm	75mm	26mm	54mm	SGD 126.40

APPROVED VENDOR -

Drop Forged Carbon Steel Eyebolt, Zinc Plated Finish

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Overall Length	Shank Dia.	Shank Length	Shoulder Dia.	Shoulder Length	Price (inc. GST)
A	U16010.037.0125	1"	1-11/16"	with Shoulder	3.09" to 3.47"	3/8"	1.25"	0.62 to 0.69"	0.12" to 0.19"	SGD 7.53
B	U16010.037.0250	1"	1-11/16"	with Shoulder	4.34" to 4.72"	3/8"	2.5"	0.62 to 0.69"	0.12" to 0.19"	SGD 18.92
B	U16010.037.0300	1"	1-11/16"	with Shoulder	4.84" to 5.22"	3/8"	3"	0.62 to 0.69"	0.12" to 0.19"	SGD 12.33
C	U16182.037.0250	1"	1-11/16"	without Shoulder	4.06" to 4.44"	3/8"	2.5"	-	-	SGD 11.54
C	U16182.037.0300	1"	1-11/16"	without Shoulder	4.56" to 4.94"	3/8"	3"	-	-	SGD 9.68
D	U16010.087.0226	1-11/16"	3.25"	with Shoulder	5.755" to 6.19"	7/8"	2.25"	1.31 to 1.44"	0.31" to 0.38"	SGD 41.17
E	U16010.100.0250	1-13/16"	3-9/16"	with Shoulder	6.44" to 6.88"	1"	2.5"	1.50 to 1.62"	0.38" to 0.44"	SGD 75.55
C	U16182.075.0300	1.5"	2-13/16"	without Shoulder	5.69" to 6.06"	3/4"	3"	-	-	SGD 36.24
B	U16010.075.0200	1.5"	2-13/16"	with Shoulder	5.06" to 5.5"	3/4"	2"	1.12 to 1.25"	0.25" to 0.31"	SGD 36.65
B	U16010.075.0300	1.5"	2-13/16"	with Shoulder	6.06" to 6.5"	3/4"	3"	1.12 to 1.25"	0.25" to 0.31"	SGD 43.05
B	U16010.075.0250	1.5"	2-13/16"	with Shoulder	5.56" to 6"	3/4"	2.5"	1.12 to 1.25"	0.25" to 0.31"	SGD 45.02
B	U16010.050.0300	1.187"	2-1/16"	with Shoulder	5.31" to 5.69"	1/2"	3"	0.88 to 0.94"	0.19" to 0.25"	SGD 18.83
B	U16010.050.0250	1.187"	2-1/16"	with Shoulder	4.81" to 5.19"	1/2"	2.5"	0.88 to 0.94"	0.19" to 0.25"	SGD 18.50
C	U16182.050.0150	1.187"	2-1/16"	without Shoulder	3.5" to 3.88"	1/2"	1.5"	-	-	SGD 9.01
A	U16010.050.0150	1.187"	2-1/16"	with Shoulder	3.81" to 4.19"	1/2"	1.5"	0.88 to 0.94"	0.19" to 0.25"	SGD 18.80
C	U16182.050.0250	1.187"	2-1/16"	without Shoulder	4.5" to 4.88"	1/2"	2.5"	-	-	SGD 13.66
C	U16182.050.0300	1.187"	2-1/16"	without Shoulder	5" to 5.38"	1/2"	3"	-	-	SGD 16.29
B	U16010.062.0175	1.375"	2.5"	with Shoulder	4.56" to 4.94"	5/8"	1.75"	1.00 to 1.06"	0.25" to 0.31"	SGD 23.35
B	U16010.062.0300	1.375"	2.5"	with Shoulder	5.81" to 6.19"	5/8"	3"	1.00 to 1.06"	0.25" to 0.31"	SGD 36.03
B	U16010.062.0250	1.375"	2.5"	with Shoulder	5.31" to 5.69"	5/8"	2.5"	1.00 to 1.06"	0.25" to 0.31"	SGD 37.71
C	U16182.062.0300	1.375"	2.5"	without Shoulder	5.44" to 5.81"	5/8"	3"	-	-	SGD 43.51
C	U16182.025.0100	3/4"	1.187"	without Shoulder	2.06" to 2.38"	1/4"	1"	-	-	SGD 3.30
A	U16010.025.0100	3/4"	1.187"	with Shoulder	2.22" to 2.53"	1/4"	1"	0.50 to 0.56"	0.12" to 0.19"	SGD 7.95
A	U16010.031.0112	7/8"	1.437"	with Shoulder	2.66" to 2.97"	5/16"	1.125"	0.56 to 0.62"	0.12" to 0.19"	SGD 9.08

APPROVED VENDOR -

Drop Forged Carbon Steel Eyebolt, Plain Finish

Style	Model	Eye Inside Dia.	Eye Outside Dia.	Eyebolt Type	Overall Length	Shank Dia.	Shank Length	Shoulder Dia.	Shoulder Length	Price (inc. GST)
A	U16000.037.0075	1"	1-11/16"	with Shoulder	2.59" to 2.97"	3/8"	3/4"	0.62 to 0.69"	0.12" to 0.19"	SGD 8.38
A	U16000.037.0250	1"	1-11/16"	with Shoulder	4.34" to 4.72"	3/8"	2.5"	0.62 to 0.69"	0.12" to 0.19"	SGD 8.08
A	U16000.037.0300	1"	1-11/16"	with Shoulder	4.84" to 5.22"	3/8"	3"	0.62 to 0.69"	0.12" to 0.19"	SGD 49.25
B	U16180.037.0300	1"	1-11/16"	without Shoulder	4.56" to 4.94"	3/8"	3"	-	-	SGD 19.61
B	U16180.037.0250	1"	1-11/16"	without Shoulder	4.06" to 4.44"	3/8"	2.5"	-	-	SGD 20.98
A	U16000.037.0125	1"	1-11/16"	with Shoulder	3.09" to 3.47"	3/8"	1.25"	0.62 to 0.69"	0.12" to 0.19"	SGD 8.46
A	U16000.037.0062	1"	1-11/16"	with Shoulder	2.47" to 2.85"	3/8"	5/8"	0.62 to 0.69"	0.12" to 0.19"	SGD 6.04
B	U16180.037.0125	1"	1.625"	without Shoulder	2.81" to 3.19"	3/8"	1.25"	-	-	SGD 7.93
C	U16000.043.0137	1-3/32"	1-27/32"	with Shoulder	3.41" to 3.78"	7/16"	1.375"	0.75 to 0.81"	0.19" to 0.25"	SGD 13.43
D	U16000.087.0225	1-11/16"	3.25"	with Shoulder	5.755" to 6.19"	7/8"	2.25"	1.31 to 1.44"	0.31" to 0.38"	SGD 42.58
E	U16000.100.0250	1-13/16"	3-9/16"	with Shoulder	6.44" to 6.88"	1"	2.5"	1.50 to 1.62"	0.38" to 0.44"	SGD 58.89
C	U16000.075.0150	1.5"	2-13/16"	with Shoulder	4.56" to 5"	3/4"	1.5"	1.12 to 1.25"	0.25" to 0.31"	SGD 37.32
D	U16000.075.0300	1.5"	2-13/16"	with Shoulder	6.06" to 6.5"	3/4"	3"	1.12 to 1.25"	0.25" to 0.31"	SGD 44.85
C	U16000.075.0125	1.5"	2-13/16"	with Shoulder	4.31" to 4.75"	3/4"	1.25"	1.12 to 1.25"	0.25" to 0.31"	SGD 31.87
F	U16180.075.0250	1.5"	2-13/16"	without Shoulder	5.19" to 5.56"	3/4"	2.5"	-	-	SGD 51.13
D	U16000.075.0200	1.5"	2-13/16"	with Shoulder	5.06" to 5.5"	3/4"	2"	1.12 to 1.25"	0.25" to 0.31"	SGD 35.32
B	U16180.075.0300	1.5"	2-13/16"	without Shoulder	5.69" to 6.06"	3/4"	3"	-	-	SGD 48.53
D	U16000.075.0250	1.5"	2-13/16"	with Shoulder	5.56" to 6"	3/4"	2.5"	1.12 to 1.25"	0.25" to 0.31"	SGD 43.42
B	U16180.075.0200	1.5"	2-13/16"	without Shoulder	4.69" to 5.06"	3/4"	2"	-	-	SGD 37.77
C	U16000.050.0100	1.187"	2-1/16"	with Shoulder	3.31" to 3.69"	1/2"	1"	0.88 to 0.94"	0.19" to 0.25"	SGD 15.75
G	U16000.050.0300	1.187"	2-1/16"	with Shoulder	5.31" to 5.69"	1/2"	3"	0.88 to 0.94"	0.19" to 0.25"	SGD 30.68
B	U16180.050.0300	1.187"	2-1/16"	without Shoulder	5" to 5.38"	1/2"	3"	-	-	SGD 31.25
C	U16000.050.0150	1.187"	2-1/16"	with Shoulder	3.81" to 4.19"	1/2"	1.5"	0.88 to 0.94"	0.19" to 0.25"	SGD 16.73
B	U16180.050.0250	1.187"	2-1/16"	without Shoulder	4.5" to 4.88"	1/2"	2.5"	-	-	SGD 31.61
B	U16180.050.0150	1.187"	2-1/16"	without Shoulder	3.5" to 3.88"	1/2"	1.5"	-	-	SGD 12.06

Eyebolts

Eyebolts are ideal for vertical lifting applications and tying ropes & cables by firmly attaching them to a solid structure and anchoring / feeding the ropes / cables through the bolt's protruding loop (eye). Raptor Supplies offers a broad range of eyebolts from brands like Chicago Hardware, Grainger, Ken Forging, Fabory, and more. Heavy-duty eyebolts are used in rigging for the lifting of heavy loads, whereas smaller eyebolts are used for tensioning wires and similar non-load-bearing operations. These eyebolts are available in both Metric and Imperial designs.

Features

An eyebolt has two major parts - an eye & a threaded shank.
The eye is the section with a loop at one end to secure cable or wires.
The threaded shank or rod is used to securely screw the bolt into a structure. The larger the shank diameter, the larger the working load limit.
Shoulder eyebolts have shoulders to allow loading at slight angles.
Eyebolts offer rigid movement without any bending for precise & predictable control.
Chicago Hardware eyebolts adhere to ASME B30.26 standards. They have stainless steel or steel construction with black oxide / galvanised / zinc coating for structural rigidity & corrosion resistance.
Ken Forging eyebolts are available in variants with or without a shoulder and have shank lengths ranging from 5/8 to 24 inches (Imperial) or 25.4 to 127 mm (Metric).

Categories

Brands

Eyebolts

Eye Bolts

Eye Bolts

Eye Bolts

Eye Bolts

Eye Bolts

Eye Bolts

Eye Bolts

Eye Bolt Lifts

Pad Eyes

Lifting Eye Bolts

Eye Bolt

Low Carbon Steel 4.6 Eye Bolt, Plain Finish

Low Carbon Steel C15E Lifting Eye Bolt, Plain Finish

316 Stainless Steel Eyebolt, High Polish Finish

A2 Stainless Steel Eyebolt, Plain Finish

Drop Forged Steel Eyebolt, Plain Finish

Steel Eyebolt, Zinc Plated Finish

Drop Forged Carbon Steel Eyebolt, Hot Dipped Galvanized Finish

Drop Forged Steel Eyebolt, Zinc Plated Finish

Drop Forged Carbon Steel Eyebolt, Zinc Plated Finish

Drop Forged Carbon Steel Eyebolt, Plain Finish

Eyebolts

Features

Frequently Asked Questions

We are here to help!

Looking for a part not listed here?

Popular Search Queries

Explore More