Ice Machine Pumps | Raptor Supplies Singapore
Onboard Raptor as a vendor

HARTELL Ice Machine Pumps

Fit commercial ice-making equipment to supply water & provide a continuous supply of ice. Can also reuse the discharged condensate from the ice-making equipment.

Filter

Hartell replacement ice machine pumps are designed to fit commercial ice-making equipment, such as Scotsman, Manitowoc, Ice-O-Matic, Cornelius / Ross Temp, Crystal Tips / McQuay, Whirlpool / Frigidaire and York.

HARTELL -

GPP Series Ice Machine Pumps

HARTELL GPP-3MA-1A
HARTELL GPP-5MA-1B
HARTELL GPP-3S-1BC
HARTELL GPP-1MH-1PD
HARTELL GPP-4S-1E
HARTELL GPP-3MH-1PF
HARTELL GPP-3S-1G
HARTELL GPP-3M-1SH
HARTELL GPP-4MA-1I
HARTELL GPP-4S-2J
HARTELL GPP-3S-2K
HARTELL GPP-8MA-2AL
HARTELL GPP-5MA-2AM
HARTELL GPP-3RC-4N
HARTELL GPP-6L-2BO
HARTELL GPP-4MH-2PP
HARTELL GPP-3MH-2PQ
HARTELL GPP-9M-4R
StyleModelVoltageOutside Dia.FrequencyPrice (inc. GST)
AGPP-3MA-1115V1"60 Hz SGD 507.38
BGPP-5MA-1115V1/2"60 Hz SGD 302.24
CGPP-3S-1B115V3/4"60 Hz SGD 255.21
DGPP-1MH-1P115V5/8"50/60 Hz SGD 196.14
EGPP-4S-1115V3/4"60 Hz SGD 231.27
FGPP-3MH-1P115V5/8"60 Hz SGD 192.61
GGPP-3S-1115V1/2"60 Hz SGD 259.25
HGPP-3M-1S115V3/4"60 Hz SGD 275.33
IGPP-4MA-1115V1/2"60 Hz SGD 259.53
JGPP-4S-2230V3/4"50/60 Hz SGD 198.27
KGPP-3S-2230V1/2"50/60 Hz SGD 226.24
LGPP-8MA-2A230V1"50/60 Hz SGD 241.73
MGPP-5MA-2A230V1/2"50/60 Hz SGD 313.59
NGPP-3RC-4230V5/8"50/60 Hz SGD 219.33
AGPP-3MA-2230V1"50/60 Hz SGD 517.76
OGPP-6L-2B230V5/8"50/60 Hz SGD 253.63
PGPP-4MH-2P230V5/8"50/60 Hz SGD 167.86
QGPP-3MH-2P230V5/8"50/60 Hz SGD 202.98
DGPP-1MH-2P230V5/8"50/60 Hz SGD 158.55
RGPP-9M-4230V1"50/60 Hz SGD 295.40
OGPP-15Y-2230V1"50/60 Hz SGD 323.37

Features

  • Hartell ice machine pumps have a dual ball bearing system to provide high speeds and low friction.
  • They have a stainless steel shaft to prevent contamination and protect critical moving components.
  • These pumps feature a thermally protected motor to prevent overheating.

Frequently Asked Questions

How to install Hartell ice machine pumps?

  • Position and hold the motor with the shaft facing up.
  • Place one washer over each motor stud.
  • Slide the slinger down the motor shaft to about 1/2-inch from the motor.
  • Place bracket (if used) over motor studs.
  • Place the housing over motor studs and note the orientation of discharge.
  • Place one washer over each motor stud.
  • Screw the thumb nuts onto the motor studs. Do not tighten.
  • Center the motor shaft in the housing centre hole and tighten the thumb nuts.
  • Slide the impeller onto the motor shaft.
  • Push and hold down the impeller. Screw the impeller nut into the motor shaft until it touches the impeller.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More