Regenerative Desiccant Compressed Air Dryers | Raptor Supplies Singapore

Regenerative Desiccant Compressed Air Dryers

Filter

Regenerative desiccant compressed air dryers are used to remove moisture from the air and are suitable for use with instrumentation & control systems, spray painting & coating equipment and pneumatic tools.

INGERSOLL-RAND -

Compressed Air Dryers

Air compressor dryers from Ingersoll Rand are designed to suppress the dew point of compressed air by removing moisture from it before the air condenses into a harmful liquid. These dryers offer multi-stage filtring to remove residual contaminants and improve system efficiency & product quality. Their energy-efficient design features a refrigeration system combined with thermal mass to store cold energy efficiently. These dryers are equipped with an easy-to-use microprocessor controller to gain maximum control over the working of the dryer while monitoring current conditions. Ingersoll dryers feature multiple alarm displays to minimise downtime and energy-saving mode for automatic shut off. Some models come with centrifugal separation to separate and remove moisture from the chilled air. Choose from a wide range of Ingersoll Rand compressed air dryers, available in single- and three-phase models on Raptor Supplies.

StyleModelCfmDepthFull Load AmpsHeightIso ClassMax. Ambient Temp.Max. Inlet Temp.Max. PressurePrice (inc. GST)
AD12IN7-2.8-6122 Degrees F140 Degrees F203 psi SGD 3124.92
AD18IN11-2.8-6122 Degrees F140 Degrees F203 psi SGD 2954.94
AD25IN-SR15-2.8-6122 Degrees F140 Degrees F203 psi SGD 2953.37
BD25IT15-5-6122 Degrees F200 Degrees F203 psi SGD 7101.27
BD42IT25-7-6122 Degrees F200 Degrees F203 psi SGD 8347.23
AD42IN25-3.6-6122 Degrees F140 Degrees F203 psi SGD 5116.60
AD54IN32-6-6122 Degrees F140 Degrees F203 psi SGD 5370.64
BD60IT35-7-6122 Degrees F200 Degrees F203 psi SGD 9849.73
BD102IT60-11-6122 Degrees F200 Degrees F203 psi SGD 12663.60
AD108IN64-8-6122 Degrees F140 Degrees F203 psi SGD 8517.41
BD140IT82-11-6122 Degrees F200 Degrees F203 psi SGD 14601.34
BD170IT100-13.5-6122 Degrees F200 Degrees F203 psi SGD 18479.56
CHLA1201H00AA12030"4.063"2120 F120°F- SGD 24992.33
RFQ
CHLA1601H00AA16032"4.066"2120 F120°F- SGD 27873.78
RFQ
DNVC200200-6-4115 Degrees F120 Degrees F230 psi SGD 27644.84
CHLA2001H00AA20032"4.066"2120 F120°F- SGD 26270.86
RFQ
ED420INA400250-6-4120 Degrees F120 Degrees F300 psi SGD 22414.53
CHLA2501H00AA25032"4.067"2120 F120°F- SGD 26725.11
RFQ
CHLA3001H00AA30032"4.067"2120 F120°F- SGD 31459.40
RFQ
FNVC300300-10-4115 Degrees F120 Degrees F230 psi SGD 32650.38
ED510INA400300-8-4120 Degrees F120 Degrees F300 psi SGD 26945.10
ED680INA400400-12-4120 Degrees F120 Degrees F300 psi SGD 29906.87
DNVC400400-12-4115 Degrees F120 Degrees F230 psi SGD 37060.28
GHLA4001H00AA40036"4.068"2120 F120°F- SGD 35516.23
RFQ
CHLA5001H00AA50040"4.083"2120 F120°F- SGD 42414.36
RFQ
StyleModelPrice (inc. GST)
A53RG71 SGD 17348.69
A53RG67 SGD 9226.56
A53RG68 SGD 10056.25
A53RG69 SGD 11109.11
RFQ
A53RG70 SGD 12325.56
A53RG62 SGD 5737.57
A53RG63 SGD 6465.92
A53RG64 SGD 7101.67
A53RG65 SGD 8028.80
A53RG66 SGD 8187.04
RFQ
A53RG61 SGD 4880.30
A53RG60 SGD 4255.31

Working Mechanism

  • When the compressed air enters the dryer, it passes through one of the towers filled with the desiccant material.
  • As the air moves through the desiccant, the moisture in the air is adsorbed by the desiccant material, leaving behind dry compressed air.
  • The dry air then exits the dryer and is ready for use in various industrial applications.
  • Once the first tower has reached its capacity to absorb moisture, the dryer switches over to the second tower, while the first tower goes through a regeneration cycle.
  • During the regeneration cycle, the second tower is shut off and the first tower is depressurised and the desiccant is heated using electric heaters or natural gas burners.
  • The heat source evaporates the moisture that was adsorbed by the desiccant and vented out of the dryer as hot, moist air.
  • The hot, moist air is then purged from the tower using a purge air flow, which carries away the moisture and vents it outside the dryer.
  • The regenerated first tower is then re-pressurised and the drying cycle resumes with the second tower now in the regeneration cycle.

Features

Hankison Modular Desiccant Air Dryers:

  • These desiccant dryers have aluminium components to resist corrosion due to moisture.
  • They prevent fluidisation and slow / complete regeneration to avoid desiccant ageing.
  • These units have a strong internal sound attenuation, ensuring quiet operation.

Ingersoll Rand Air Dryers:

  • They have microprocessor controllers and additional air filters to remove oil and contaminants.
  • These dryers are designed for applications with high air flow (up to 120 cfm).
  • Their bodies feature stainless steel construction to resist contamination due to water vapour produced during the operation.

Frequently Asked Questions

How do I select the right size of regenerative desiccant compressed air dryer for my application?

Consider factors like the flow rate & pressure of the compressed air, the level of moisture in the compressed air and the desired dew point.

How to maintain regenerative desiccant air dryers?

Regular maintenance of these compressed air dryers involves checking & replacing the desiccant material, cleaning and inspecting the valves & piping, checking & replacing the filters and monitoring the performance of the dryer.

How to ensure safety during the regeneration process?

  • The desiccant material gets hot during the regeneration process, handle it with caution.
  • Ensure proper ventilation of hot air used for regeneration.

How do I determine the appropriate dew point for my compressed air application?

The correct dew point for any compressed air application depends on the sensitivity of the equipment or process to moisture, the environmental conditions and the safety & quality requirements.

What is the difference between a heated and heatless air dryer?

Heated desiccant dryers use heat, while heatless dryers use dry air (generated by them) to remove water vapour from the desiccant material.

We are here to help!

Looking for a part not listed here?