Shoulder Screws - Page 13 | Raptor Supplies Singapore

Shoulder Screws

Filter

Shoulder screws, a type of machine screw, have threadings only on half or lower part of the screw shank and a partially smooth shaft for keeping the workpieces together. They permit full rotational... Read More

APPROVED VENDOR -

Shoulder Screw 6-32 X 3/16 L, 10PK

ModelItemPrice (inc. GST)
4462AE9HJF SGD 42.66
APPROVED VENDOR -

Shoulder Screw 6-32 x 1/8 L - Pack Of 10

ModelItemPrice (inc. GST)
4461AE9HJE SGD 93.52
APPROVED VENDOR -

Shoulder Screw 4-40 X 1/2 L, 10PK

ModelItemPrice (inc. GST)
6907SSAE9HJD SGD 52.99
APPROVED VENDOR -

Shoulder Screw 4-40 X 7/16 L, 10PK

ModelItemPrice (inc. GST)
6906SSAE9HJC SGD 45.38
APPROVED VENDOR -

Shoulder Screw 4-40 X 3/8 L, 10PK

ModelItemPrice (inc. GST)
4414AE9HJB SGD 39.62
APPROVED VENDOR -

Shoulder Screw 4-40 X 1/4 L, 10PK

ModelItemPrice (inc. GST)
4412AE9HHZ SGD 43.37
APPROVED VENDOR -

Shoulder Screw Stainless Steel 5/16-18 1/2, 5PK

ModelItemPrice (inc. GST)
4349AE9HHQ SGD 56.92
APPROVED VENDOR -

Shoulder Screw 4-40 X 3/16 L, 10PK

ModelItemPrice (inc. GST)
4411AE9HHY SGD 37.10
APPROVED VENDOR -

Shoulder Screw 4-40 X 1/8 L, 10PK

ModelItemPrice (inc. GST)
4410AE9HHX SGD 33.66
APPROVED VENDOR -

Shoulder Screw Stainless Steel 3/8-16 1 Inch, 5PK

ModelItemPrice (inc. GST)
4354AE9HHW SGD 106.47
APPROVED VENDOR -

Shoulder Screw Stainless Steel 3/8-16 3/4, 5PK

ModelItemPrice (inc. GST)
4353AE9HHV SGD 95.43
APPROVED VENDOR -

Shoulder Screw Stainless Steel 3/8-16 5/8, 5PK

ModelItemPrice (inc. GST)
4352AE9HHU SGD 100.87
APPROVED VENDOR -

Shoulder Screw Stainless Steel 3/8-16 1/2, 5PK

ModelItemPrice (inc. GST)
4351AE9HHT SGD 76.17
APPROVED VENDOR -

Shoulder Screw Stainless Steel 5/16-18 5/8, 5PK

ModelItemPrice (inc. GST)
4350AE9HHR SGD 57.70
APPROVED VENDOR -

Shoulder Screw Stainless Steel 10-32 3/8 L, 10PK

ModelItemPrice (inc. GST)
4330AE9HGV SGD 47.59
APPROVED VENDOR -

Shoulder Screw Stainless Steel 10-32 1/4 L, 10PK

ModelItemPrice (inc. GST)
4328AE9HGT SGD 44.13
APPROVED VENDOR -

Shoulder Screw 1/4-20 X 1/2 Length, 10PK

ModelItemPrice (inc. GST)
U07111.031.0050AE2LBP SGD 11.38
APPROVED VENDOR -

Shoulder Screw Alloy Steel 5/8-11 x 4-3/4 Inch

ModelItemPrice (inc. GST)
U07111.075.0475AE4VEK SGD 24.94
APPROVED VENDOR -

Shoulder Screw Stainless Steel 4-40 3/16 L, 10PK

ModelItemPrice (inc. GST)
4311AE9HFC SGD 31.40
APPROVED VENDOR -

Shoulder Screw Stainless Steel 4-40 1/8 L, 10PK

ModelItemPrice (inc. GST)
4310AE9HFB SGD 25.62
APPROVED VENDOR -

Shoulder Screw Alloy Steel 3/4-10 x 3"

ModelItemPrice (inc. GST)
5MXX2AE4VEP SGD 140.15
See Details
1...12131415

Shoulder Screws

Slot mount standoffs are hardware used to support panels, signs, or shelves made of glass or other materials. They attach to the wall and grip the panel via a slot, eliminating the need for drilling. They can be used to hold panels either vertically or horizontally, offering flexibility in how you display your signs or shelves. The slot widths are designed to match common panel thicknesses, ensuring a snug fit.

Features

  • Shoulder screws are installed in pre-tapped holes that require alignment with tolerance. They do not have a tapered shank / pointed tip and hence, can not self-thread into soft materials.
  • The head section has the largest diameter that prevents the screw from going too deep and a drive mechanism to apply torque for installation / removal.
  • The shoulder is the smooth part, in the middle, that is more than half of the screw length. It allows rotational movement of the bolted workpiece around the screw axis.
  • The threaded part of the screw has right- or left-handed helix grooves to accept the mating thread of a nut or tapped hole.

Accurate Manufactured Products Shoulder Screws:

  • Users can lengthen the shoulder for more bearing surface by adding washers over their threads and similarly shorten it for better clearance, under the head, by slipping washers over the shoulder.
  • Selected models feature AMPG self-locker adhesive that prevents loosening from vibration. It remains dry-to-the-touch until the shearing action of the engaging threads causes the capsules to break, thereby allowing the adhesive to cure. This adhesive permits repeated usage without damaging the threads.

Camcar Shoulder Screws:

  • They have a TORX PLUS drive system to prevent tampering and accidental opening.
  • Some models are equipped with a locking nylon patch for vibration resistance, once locked / assembled.

Frequently Asked Questions

Are shoulder screws the same as shoulder bolts?

Yes, shoulder screws are also known as shoulder bolts.

What is a shoulder screw used for?

Shoulder screws are used to hold together objects in punch-and-die mechanisms, vacuum systems, pulleys, linkages and plastic-injection mold sets. They are widely used in applications that require a mounting pin, joint, shaft, dowel or pivot.

What safety precautions should I take when using these slot mount standoffs?

  • Wear appropriate personal protective equipment (PPE) such as safety glasses and gloves.
  • Inspect standoffs for defects, damage or wear before use.
  • Ensure the mounting surface is clean and flat.
  • Use the correct size and type of fasteners to secure standoffs.
  • Avoid overtightening fasteners to prevent damage.
  • Securely fasten components to prevent accidents.
  • Do not exceed the maximum weight capacity of standoffs.
  • Periodically inspect standoffs and mounted components for wear.
  • Dispose of standoffs properly according to local regulations.

What is the tensile strength of these slot mount standoffs?

  • Aluminium slot standoffs have 50000 psi tensile strength.
  • 18-8 stainless steel slot standoffs have 80000 psi tensile strength.

What are the factors to consider while choosing these shoulder screws?

Major factors include application requirements, material strength, shoulder dimensions, thread specifications, head style, surface finish, customisation options, load capacity and precision.

What different types of shoulder screws are available on Raptor Supplies?

Raptor Supplies offers shoulder screws in various configurations, including self drilling screws, slotted head, hex head lag screws and captive panel screws. Additionally, they may have different shoulder lengths, diameters and thread types to accommodate specific application requirements.

We are here to help!

Looking for a part not listed here?