Item | Washdown Motor |
Ambient Temp. | 104°F |
Application | Washdown |
Bearing Type | Ball |
Body Dia. | 5.63" |
Bolt Circle Dia. | 5 1/8" |
Drain Plug | 4 Condensate Drains At Shaft Endshield, Side: 3, 6, 9, 12 O'Clock Positions, Opposite Endshield, Face: 3, 9 O'Clock |
Duty Cycle | Continuous |
Endshield Material | Stainless Steel |
Extended Thru-bolts | Yes |
Finish | Unfinished |
Frame | 48YZ |
Frame Material | Stainless Steel |
Frequency | 60 Hz |
Full Load Amps | 5.8A |
Hp | 1/2 hp |
Includes | Stud Mounting Hardware: (4) Stainless Steel 10-32 Hex Nuts, (4) Stainless Steel #10 Fender Washers, Spare T-Drain And Plug |
Insulation Class | Class F |
Motor Design | Permanent Split Capacitor |
Motor Enclosure Design | Totally Enclosed Air Over |
Motor Mounting Position | Horizontal |
Motor Shaft Design | Flat |
Motor Shaft Rotation | Clockwise/Counter Clockwise , CW/CCW |
Motor Type | Capacitor Start/Run |
Mounting Stud Length | 3/4" |
Mounting Type | Yoke |
Nameplate Rpm | 1075 RPM |
No. Of Speeds | 1 |
Nominal Efficiency | 63.3% |
Overall Length | 12 9/16" |
Phase | 1 |
Service Factor | 1 |
Shaft Dia. | 5/8" |
Shaft Length | 4 1/16" |
Shaft Material | Stainless Steel |
Stud Length | 9.1" |
Stud Pattern | 3 5/8" x 3 5/8" |
Stud Size | #10-32 |
Thermal Protection | Automatic |
Usable @ 200v | No |
Usable @ 208v | No |
Voltage | 115V AC |