Item | Turbine pump |
Amps | 14.4/7.2 |
Bearing Type | Ball |
Best Efficiency Gpm @ Head | 9.4 @ 50 Ft. |
Best Efficiency Range Gpm @ Head | 25 - 65 @ 10.9 - 8.7 Ft. |
Construction | Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. |
Drain Plug | easily accessible at bottom |
Duty | Continuous |
Frame | 56J |
Frequency | 60 Hz |
Gpm | 7.5 |
Gpm @ 10 Psi | 11.5 |
Gpm @ 100 Psi | 7 |
Gpm @ 20 Psi | 11.1 |
Gpm @ 30 Psi | 10.6 |
Gpm @ 40 Psi | 10 |
Gpm @ 50 Psi | 9.4 |
Gpm @ 60 Psi | 8.9 |
Gpm @ 75 Psi | 8.3 |
Gpm @ 80 Psi | 8 GPM |
Height | 8 1/8" |
Housing Material | Bronze |
Hp | 1 hp |
Hz | 60 |
Impeller Material | Bronze |
Impeller Type | Open |
Inlet | 1" |
Inlet Pressure | 132 psi |
Length | 15 3/4" |
Max. Case Pressure | 200 psi |
Max. Flow Rate | 11.2 GPM |
Max. Fluid Viscosity | 100 SSU |
Max. Liquid Temp. | -20°F to +230°F |
Max. Pressure | 120 psi |
Max. Specific Gravity | 1 |
Min. Flow Rate | 3 GPM |
Motor Enclosure | Open Drip Proof |
Motor Rpm | 3450 |
Motor Type | Capacitor-Start, Induction Run |
Nema/iec Frame | 56J |
Outlet | 1" |
Phase | 1 |
Screw Material | Stainless Steel |
Seal Application | Long Life When Not Run Dry Or Pumping Abrasives |
Seal Material | Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring |
Seal Type | Mechanical |
Service Factor | 1.4 |
Shaft Material | Stainless Steel |
Shaft Size | 5/8" |
Type | Centrifugal |
Voltage | 115/230 |
Volute Material | Bronze |
Wetted Materials | Bronze, Buna-N, Carbon, Ceramic and 316 Stainless Steel |
Width | 6 3/4" |