DYNABRADE 13450 Finishing Tool 1hp 2800rpm

Dynabrade 13450 finishing tool is ideal for refinishing stainless steel sinks and countertops in restaurants, banquets and commercial kitchens. It has a throttle lever for easy operation. This Dynisher operates at low speeds to achieve deep and long grain patterns.

Working Mechanism:

• Secure the inlet bushing on this air tool with a wrench before installing the air fitting to avoid housing assembly damages.
• With the power source disconnected from the air tool, mount recommended accessory onto the assembly.
• Inflate the Dynacushion wheel with air up to 20 PSIG.
• Connect the air tool with the power source. Do not depress the throttle lever in the process.
• Use a clamping device to hold the workpiece firmly.
• Apply pressure gently to smoothen the workpiece.

Compatible Accessories:

• Dynabrade 92938 Dynacushion Pneumatic Wheel: This wheel is suitable for smooth movement on the workpiece.
• Dynabrade 95843 Air Lube: This lubricant avoids sludge or rust formation.
• Dynabrade 95461 Dynaswivel: It provides a 360-degree swivel, allowing the air hose to drop directly to the floor.
• Dynabrade 10681 Air Filter-Regulator-Lubricator: This unit provides accurate air pressure regulation, two-stage water filtration and lubrication of pneumatic components.

Frequently Asked Questions:

Q. How to ensure safety while operating this Dynabrade pneumatic tool?

A.

• Read the operator manual (supplied with the tool) before operating.
• Use ear, eye and respiratory protection during the operation.
• Avoid damaged, frayed or deteriorated air hoses and fittings.
• Use this finishing tool in well-ventilated areas.

Q. How often should this finishing tool be lubricated?

A. Dynabrade finishing tool requires 2 - 3 plunges of grease after every 24 hours of use.