Item | Pump |
Application | Construction, Agriculture, Truck And Bus, Material Handling, Other Mobile |
Bearing Life At Rated Pressure | 5850 hrs. |
Code Title | 220 Series Mobile Piston Pump |
Continuous Allowable Case Pressure | 19 psi |
Control Special Features | Bleed Down Orifice |
Controller Type | Pressure Flow Compensator With .4375-20 Sae O-Ring Load Sense Port Left Side |
Design Code | First |
Diagnostic Pressure Ports | .4375-20 Unf-2B Sae O-Ring Ports-Suction And Pressure-Plugged |
Displacement | 28 cc/rev. |
Drain Port Size And Location | 0.875-14 UNF-2B O-Ring Port, Top (28CC And 45CC) |
Flow Compensator Setting - Maximum | 15 Bar |
Fluid Cleanliness | 21/18/13 |
Front Mounting | 2 Bolt B |
Height | 9.02" |
Housing Material | Cast Iron |
Identification | Mark Eaton Product Number And Full Model Code On Label |
Inlet Pressure | 64 psi |
Input Shaft | Straight Shaft Diameter 22.2 [.88], Keyway (SAE J744-22-1 B) |
Input Speed At 0.8 Bar Absolute | 2700 RPM |
Input Speed At 1.0 Bar Absolute | 3000 RPM |
Length | 9 17/25" |
Main Port Size And Location | Rear Ports, Suction - 1.625-12 UN-2B SAE O-Ring Port, Pressure - 1.0625-12 UN-2B SAE O-Ring Port |
Max. Displacement Option | External Manual Stroke Adjustment (Set at Maximum) |
Max. Input Power | 39.2 kW |
Max. Input Torque | 1106 lbs.-in. |
Max. Pressure Compensator Setting | 283 Bar |
Max. Recommended Operating Viscosity | 40 cST |
Maximum Case Pressure | 45 psi |
Maximum Input Speed | 3600 RPM |
Min. Flow Compensator Setting | 12 Bar |
Min. Input Speed | 500 RPM |
Min. Pressure Compensator Setting | 276 Bar |
Min. Recommended Operating Viscosity | 16 cST |
Nominal Pressure Rating | 4060 psi |
Paint | Blue Primer |
Peak Pressure Rating | 5000 psi |
Shaft Rotation | Right |
Shaft Seal Material | Fluorocarbon Rubber |
Torque Control Setting | 0 lbs.-in. |
Warranty | Hydraulics Warranty |
Weight | 35.9 lbs. |
Width | 6.85" |