Item | Pump |
Application | Construction, Agriculture, Truck And Bus, Oil And Gas, And Other Mobile Applications |
Auxiliary Mounting | 2-Bolt A SAE Flange Series 82-2 |
Charge Pressure Relief Valve Setting | 275 Bar |
Charge Pump | 6.9 CM3/R [.42 IN3/R] With 1.3125-12 UN-2B SAE O-Ring Port For Suction Inlet (S) |
Charge Pump Displacement | 6.9 cc/rev. |
Code Title | 49.2 Cm3/R [3.00 In3/R] Servo Controlled Variable Displacement Pump |
Configuration | Single |
Control | Manual Displacement Control |
Design Code | D |
Destroke Valve | No |
Displacement | 49.2 cc/rev. |
Drain Port Size And Location | 1.0625-12 UN-2B SAE O-Ring Port, Left (D1) & Right (D2) Sides, Left Side Plugged, Thru Drain Into Rear Auxiliary Flange (D3) |
Drive Shaft Seal Configuration | Single |
Flow At Rated Speed And Psi | 169 LPM |
Height | 8.85" |
High Pressure Relief Valve Setting Port A | 275 Bar |
Housing Material | Cast Iron |
Identification | Standard |
Input Mounting Flange | SAE B |
Input Shaft | 15 Tooth 16/32 External, Diameter 24.98 [.984], Shaft Extension 46 [1.81] |
Length | 12.63" |
Main Port Location A | Right Side |
Main Port Location B | Right Side |
Main Port Orientation | Radial |
Main Ports | 1.3125-12 UN SAE O-Ring Port |
Max. Input Power | 102 kW |
Max. Input Torque | 286 N-m |
Max. Rated Speed | 3600 RPM |
Max. Working Pressure | 350 Bar |
Min. Working Pressure | 5076 psi |
Mounting Flange Location | Standard J744 |
Mounting Type | Standard |
Output Shaft | 9 Tooth 16/32 Internal, Diameter 15.88 [.625], Accepts Shaft Extension 31.8 [1.25] |
Paint | Primer Per Spec 209-13A |
Peak Pressure Rating | 5500 psi |
Shaft Rotation | Right |
Special Features | None |
Type | Variable Displacement |
Unit Type | Single |
Warranty | Hydraulics Warranty |
Weight | 62 lbs. |
Width | 8.02" |