GOULDS WATER TECHNOLOGY RGS2012 Grinder Pump, 2 hp, Cast-Iron, 1-1/4 Inch FNPT Discharge

Item: AD8WWK Model: RGS2012Cross Ref: 4NE67

See variants (1)

In Stock

Get it by Tuesday, Feb 11

SGD 4,618.78 /unit (inc. GST)

Add To Cart

Request a Quote

Payment

Delivery

Product Specifications:

Item	Grinder Pump
Amps	15A
Base Material	Cast Iron
Bearing Type	Ball
Cord Length	20 ft.
Diameter	11 1/8"
Discharge Npt	1-1/4 In.
Frequency	60 Hz
Gpm Of Water @ 10 Ft. Of Head	42
Gpm Of Water @ 15 Ft. Of Head	41
Gpm Of Water @ 20 Ft. Of Head	41
Gpm Of Water @ 25 Ft. Of Head	41
Gpm Of Water @ 30 Ft. Of Head	41
Gpm Of Water @ 40 Ft. Of Head	39
Gpm Of Water @ 5 Ft. Of Head	42
Gpm Of Water @ 50 Ft. Of Head	38
Gpm Of Water @ 60 Ft. Of Head	35
Gpm Of Water @ 70 Ft. Of Head	30
Gpm Of Water @ 80 Ft. Of Head	24
Gpm Of Water @ 90 Ft. Of Head	15
Height	18 1/2"
Hp	2 hp
Impeller Material	Bronze
Max. Dia. Solids	3"
Max. Head	101 ft.
Max. Liquid Temp.	104°F
Max. Temp.	104 F
Motor Rpm	3450
Motor Type	Capacitor Start
Off Point	6 1/2"
On Point	18"
Phase	1
Rpm	3450 RPM
Shaft Material	Stainless Steel
Shaft Seal	Stainless Steel, Buna N, Silicon Carbide
Thermal Protection	Yes
Voltage	208/230

RGS Series sewage grinder pump used to shred large particles into a fine slurry so that the waste can be pumped into a central sewage system
Designed for high head sewage applications and can be used with plastic, paper, rubber, cloth and non-abrasive solids

Features reversible stationary cutter ring for longer service and cast iron volute casing for higher efficiency
Offers mechanical seal protection with silicon bronze semi-open impeller that has non-overloading, two vane design and pump-out vanes
Motor surrounded by high-grade turbine oil to provide efficient heat dissipation, permanent lubrication of bearings and protection from harsh environments
Severe duty rated power cable that is oil- & water-resistant
Features an epoxy seal on the motor end that acts as a secondary moisture barrier and prevents oil wicking in case of outer jacket damage

Not suitable for use with septic systems as the minute particles will not be filtered out and may contaminate the groundwater

Product	Model	Bearing Type	Diameter	GPM of Water @ 10 Ft. of Head	GPM of Water @ 40 Ft. of Head	Impeller Material	Max. Dia. Solids	Motor Type	Shaft Material	Price
	RGS2012PA	Upper and Lower Ball	11 1/8"	41	40	Cast Silicon Bronze	2"	Capacitor Start	AISI 300 SS	SGD 4,001.51

Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 09:00 until 17:00.

0900 - 1700 (Mon-Fri)

}

We reply within 30 mins!

We reply within 30 mins!