Item | Handheld Surface Roughness Tester |
Battery Voltage | 9V |
Calibration Functions | Digital Calibration |
Compatible Data Output Cable | Mfr. No. 4346020, Mfr. No. 4346023 |
Construction | Cast Aluminum |
Data Output Connection Type | Rs232C, Usb |
Data Output Type | Cable |
Detector Measuring Force | 15 mN |
Dimensions (display Unit) | 6.35 mm x 140 mm x 76 mm |
Display Functions | Lcd |
Drive Unit Principle | Skid |
Features | Durable Cast Aluminum Housing To Provide Years Of Accurate And Reliable Measuring Operations, Review All Of The Parameters After The Measurement Is Complete, Adjustable Measuring Length Based On 1, 3 Or 5 Times The Cutoff Wavelength Of 0.8Mm/0.030", Operates In Any Position Horizontal, Vertical, And Upside Down, Four Switchable Probe Positions, Even Difficult To Reach Surfaces Such As Inside And Outside Diameters Are Accessible, Marconnect Data Output For Easy Data Transfer That Is Compatible With Standard Data Processing Systemseasy To Read Lcd Presents The Measured Roughness Value In M Or Inch Immediately After Scanningout Of Range (High Or Low) And 'Low Battery' Signals Are Also Displayedsimplified Calibration Processimproved Battery Life With 9V Battery That Is Easy To Replace |
For Use With | Pocket Surf Probes |
Includes Printer | No |
Ip Rating | Not Rated |
Max. Operating Temp. | 112°F |
Measurement Range | 6.35 µm |
Measuring Condition Standards | Din Iso/Jis |
Memory Storage Capacity | 1 |
Min. Operating Temp. | 41°F |
Number Of Parameters Measured | 4 |
Number Of Sampling Spans | 1, 2, 3, 4, 5 |
Operating Position | Horizontal, Upside Down, Vertical |
Operating Temp. Range | +41.0°F to +112.0°F |
Parameters Measured | Rarmaxryrz |
Probe Sensor Type | Piezoelectric |
Probe Tip Radius | 5 µm |
Profile Resolution | 0.01 µm, 1 µin. |
Spc Output | Yes |
Transverse Cutoff Length | 0.03" |