MILWAUKEE VALVE 508 - 200 Swing Check Valve, Horizontal, Bronze, 2 Inch Valve Size

Milwaukee 508-200 swing check valve allows water to enter a tank while blocking the reverse flow. It is used in sewage systems, wastewater treatment, firefighting and power plants.

Working Mechanism:

• Milwaukee 508-200 swing check valve mounts on a pipeline with a disc that swings on a hinge or shaft.
• The disc swings off the seat when the forward flow is needed.
• As the flow stops, the disc swings back onto the seat to block the reverse flow by creating a bubble-tight shut-off.

Features:

• Milwaukee 508-200 swing check valve has a horizontal full port design to avoid flow reduction when water goes from the pipe to the valve.
• It features a pinned rotating disc that offers improved sealing to prevent backflow and reduces the chances of shock or water hammer in the pipeline.
• This 2-inch check valve features threaded end connections to allow easy installation & removal.

Standards and Approvals:

• MSS SP-80

Frequently Asked Questions:

Q.What is the pressure rating of this Milwaukee 508-200 swing check valve?

A. This Milwaukee check valve has a maximum steam pressure of 200 psi and maximum water pressure of 400 psi at 150 degrees F.

Q. What are the benefits of the Y-pattern on this valve?

A. The Y-type design minimises the flow resistance of the valve. In this design, the seat and stem are angled at approximately 45 degrees to give a straighter flow path at full opening and offer the least resistance to flow.