Mag-Mate RELM20 round electro lift magnet provides focused holding power and a deep-reaching magnetic field to lift thick, ferrous items like steel plates, billets, die castings and forgings.
Working Mechanism:
- Clean the workpiece where the lifting magnet will be installed and the bottom of the magnet of any debris.
Place the magnet in the centre of the workpiece. - After the magnet is in place, switch it to on / hold mode.
- To ensure strong holding force, change the load and slightly lift the piece. To ensure adequate load balance, lower the weight and move the magnet.
- Avoiding significant jarring or swinging of the load will help you transport the workpiece to its intended place.
- Move the load switch past the Off position to the drop / release position while holding for two to three seconds after placing the load over a solid surface.
- The magnet shouldn't be powered up until it makes contact with the following object to be lifted.
Features:
- Mag-Mate RELM20 electromagnetic lifting magnet features a control switch with on, off & release positions for controlling the function of an electromagnet.
- This electromagnet has a maximum holding force of 12000 lb.
- It is equipped with an indicator light that indicates electromagnet functioning.
Standards and Approvals:
Frequently Asked Questions:
Q. How does the load capacity of this Industrial Magnetics Mag-Mate RELM20 electromagnetic lifting magnet differ with workpiece thickness?
A.
- 2-1/2 inches or more -12000 lb
- 2 inches: 10000 lb
- 1-1/2 inches: 8000 lb
- 1 inch: 5500 lb
- 3/4 inches: 3000 lb
- 1/2 inches: 1500 lb
- 3/8 inches: 1100 lb
- 1/4 inches: 400 lb
Q. What safety measures should be taken while operating this electromagnetic lift magnet?
A.
- Keep contact pole areas and the load's surface clean and free of dust particles.
- Keep magnets away from moisture.
- Inspect the magnetic poles to ensure they are flat and free of damage.
- Treat pole surfaces with lubricant after usage to reduce the risk of oxidation.
Change Country
